Today, one of the major issues while jamming is connecting an acoustic guitar to a speaker. Most people still ask whether the acoustic guitar can be connected to the speaker or not. It is something that we all need as professional musicians.
Yes, you can connect an acoustic guitar with a speaker through a microphone or pick-up. For the first method, you will need to have a jack-to-jack cable, a DI box, and a microphone cable. Connect all of them together, and you will be able to connect your acoustic guitar to the speaker. For pickups, connectivity depends on magnetic and piezo pickup types.
So, if you want to know everything about connecting a guitar to a speaker, this is the perfect place to land on. Here we’ll guide you in detail about how you will be able to connect your acoustic guitar to a normal speaker.
Contents
Why Do We Have To Connect An Acoustic Guitar To Speakers?
So, most of you might be asking why on earth would we like to connect an acoustic guitar to a speaker. Some of you might prefer an amp, and some might not even like to connect an acoustic guitar to an amp either.
So, the reason why we connect an acoustic guitar to a speaker is that we do not always have an amp available, and to reach a large audience, we need to get help from speakers.
And, when you are on stage, an acoustic guitar attached to a speaker or amp works as a rhythm guitar. So, this is why we need to connect an acoustic guitar with a speaker.
5 Ways To Connect An Acoustic Guitar To Speakers
Below, we have finalized five of the easiest ways that will help you to connect your acoustic guitar with any speaker with ease.
1. Find the input/output jack of the guitar
First of all, what you need to do is check the input/output jack of the guitar that you own. Locate the jack and inspect whether or not it is fine. Tighten up its nuts, and then look for a jack-to-jack cable.
Most of the time, the jack is loose, and this is why the sound created is not perfect. So, before putting in the jack-to-jack cable, ensure that the jack of your guitar is in good condition. It would allow you to save time and do your tasks with perfection.
2. Plugin the jack-to-jack cable
Once you are done with the jack, grab a 1/4 jack-to-jack cable and put one side of the cable inside the guitar jack.
Before doing it, make sure that the jack has no dust; otherwise, the sound will have distortion. So, remove all the dust and plug the jack-to-jack cable into your guitar.
Something that you must remember is that you will have to plug in the jack firmly. If the jack is loose, it might not create the finest electric signals, and the sound may distort, so make sure that the jack is fixed firmly.
3. Plug the other side into the DI box
Now, you need to get a DI box. If you are going to connect your guitar to a normal speaker, you will need to have a DI box for a clear and smooth sound. So, get a DI box and then connect the other end of the jack to the jack cable to the DI box.
When you are putting the cable into the DI box, ensure that the DI box is at a safe place, we cannot affix the DI box, and this is why during jamming or concerts, these DI boxes break, leaving you on your own. So, keep the DI box safe.
4. Connect the microphone cable to the DI box
After connecting the jack to the jack cable to the DI box, you will have to get a microphone cable and put the female side of the cable into the DI box.
This time you will have to ensure too that the jack of the DI box has no dust. Remove all the dust if there is any. It would help you get a fine-quality sound.
5. Connect the other end of the cable to the speaker
Lastly, you will have to grab the other end of the microphone jack and put the male side of the cable into the speaker. Now, tune in your guitar, set the volume, and you are good to go. This is how you will be able to connect a normal speaker to your acoustic guitar.
How to Connect an Acoustic Guitar With No Jack To a Speaker?
Most acoustic guitars do not even have that jack. It is something quite common among acoustic guitars. Acoustic guitars are usually used to play for small jamming sessions and family gatherings. This is why most of them have no input/output jack.
So, if your acoustic guitar has no jack and you still want to connect it to the speaker, then there is only one solution left. For this, you will need to have a mic, a mic-to-speaker connecting cable, a DI box, and a speaker. Place the mix in a mic stand and set the stand in front of your acoustic guitar holder.
Make sure that the mix is not too close so that your hands touch it while playing and not too far so that it does not get the sound of the guitar.
After placing the mic, now repeat the above process and connect the mic to the DI box and the DI box to the speaker. After doing it finely, check the sound and tune the guitar as required. Doing this will help you connect your acoustic guitar to a speaker.
Can I Connect an Acoustic Guitar To a Bluetooth Speaker?
It is something that most young guitarists ask. It is what we would love to happen, but it is not possible at the moment. There is no single guitar that you can connect to a Bluetooth speaker. The reason behind it is simple.
For connecting something to a Bluetooth speaker, it is essential that both of the devices must be Bluetooth devices. Though the speaker has a Bluetooth device, the guitar does not have any Bluetooth.
So, connecting a guitar through a Bluetooth speaker is not possible at the moment. However, in the future, if there are Bluetooth-supporting guitars, it might be possible. But we will have to make sure that no sound disruption happens there.
Will it Be Fine To Use a Normal Speaker Like a Guitar Amp?
Yes, you can use a normal speaker like a guitar amp. But, there are possibilities that you will not get the sound quality you get with an amp connected.
An amp not only produces the sound but also purifies it and offers you the best possible sound, but a speaker only catches and forwards the sound.
So, if you’re going to use a speaker as an amp, do not forget to get a DI box to voice betterment. A DI box helps to resolve any kind of unbalanced sound into a balanced sound. So, for using a speaker as a guitar amp, you will have to get a DI box.
Can Any Speaker Be Used For Acoustic Guitars?
Yes, there is no hard and fast rule for using speakers for your acoustic guitars. If you have a proper setup, then you can use any speaker for connecting to your acoustic guitar.
However, you need to ensure that the wires are finely connected and the instruments are cleaned before use. Doing this will allow you to avoid any voice cancelation and distortion.
What Is The Difference Between a Speaker And an Amp?
In simple terms, a speaker is a device that catches and makes a sound for the audience. While on the other hand, an amp makes the speaker makes the sound. The sound that travels in a speaker is hearable, and we hear only what the speaker delivers.
But, if we talk about an amp, then it is an electrical device, and we cannot hear or witness how it creates and purifies the sound.
Along with it, an amp will allow you to strengthen weak electronic signals coming toward it. Once the signal is strengthened, the amp transfers the work toward the speaker, and then the speaker produces that strengthened sound.
This is how an amp works and makes the speaker work. This is the main reason why most guitarists suggest using an amp instead of a speaker.
Conclusion
In the end, if you had no idea about connecting an acoustic guitar to a speaker, this article must have proved to be a game-changer for you. Here, you might also get the answer that acoustic guitar can be connected to speakers or not.
So, follow the article and help yourself connect your acoustic guitar to the speaker. Along with it, follow other questions too and get proper knowledge about connecting any speaker to the acoustic guitar with ease.